Installation Diagram:

1. Connect GPS Navigator following the Installation Wiring Overview (Shown above) and mount it (Shown below).
2. Connect ACC power supply to the GPS Navigator with the Red Power Wire and run it securely under the petrol tank to the bike’s positive battery terminal and connect. Then, connect the Black Ground Wire to the GPS Navigator and run it securely under the petrol tank to the bike’s negative battery terminal and connect.
3. Attach Handlebar Controller where safest for easy access. Connect wire and run it securely back to GPS Navigator and connect.
4. Attach front camera securely to the bike to provide a clear view of the road ahead. Connect wire to camera and run it securely back to GPS Navigator and connect.
5. Attach rear camera securely to bike to provide a clear view of the road behind. Connect wire to camera and run it securely back under seat and petrol tank to GPS Navigator and connect. 
   • NOTE: Front and Rear camera function requires HX MICAM Accessory Camera Kit to be purchased separately.
6. At every step, secure and tuck away any excess wiring safely using fasteners such as cable ties - leaving enough wiring length to avoid restricting steering movement and damaging connectors. 

Mounting the GPS navigator:

1. Attach the mount to handlebar using the Allen Key provided.
2. Clamp the connecting rod to the mount.
3. Secure the GPS Navigator to the support bracket with four screws.
4. Installation complete. 

Micro SD Card Installation:

Micro SD card slot is concealed under the protective waterproof plate and gasket. Remove the screws with a Phillips Screwdriver - not provided. 

Insert the Micro SD card with the chip side facing up until you hear a click. After inserting micro-SD card, ensure the gasket and protective plate is securely screwed and sealed into place. 

To Format the Micro SD card, power on the device and go into the "All Apps" section. Press the settings option and then "confirm" next to "Format sdcard" to begin formatting. 

Please note that formatting an SD card will wipe its memory, so ensure that you have no important files on the storage.